Products > 3-PLY PANELS

Fichte Antik - 3-Schicht

CONIFER WOOD KNOTTY

Nordic wood is still the priority at Rema, which means that we are now an exception. Especially the top layer material of spruce, pine and larch is 100% from the far north.

A few of the good reasons for this are its very fine grain, tightly intergrown little knots and a light colour. Exceptions prove the rule since the far north cannot provide Arolla pine or European Douglas fir that grows at our doorstep.

Details

DESIGNS & VARIANTS

Fichte - 3-Schicht

nordic Spruce

Panel thickness
12, 16, 19, 22, 24, 27, 32, 42 mm
Dimensions
5050/2520 x 2050 mm
Top layer width
116/140 mm wide slat 190 mm
Top layer thickness
3,8 mm (12), 5,3 mm (16, 19, 22), 8,7 mm (ab 24)
Quality
A/AB,A/B, AB Standard, B Universal, B/C+, AB Standard wide slat, B Universal wide slat
Laerche - 3-Schicht

Siberian Larch

Panel thickness
16, 19, 24, 27, 42 mm
Dimensions
5050/2520 x 2050 mm
Top layer width
140 mm (131 mm)
Top layer thickness
5,3 mm, on request 8,7 mm
Quality
AB Standard, B Universal, B/C accrue
Kiefer - 3-Schicht

nordic Pine

Panel thickness
19, 27 mm
Dimensions
5050/2520 x 2050 mm
Top layer width
140 mm
Top layer thickness
5,3 mm

Quality
A/B, AB Standard
Zirbe-3-Schicht

Arolla pine

Panel thickness
19 mm
Length
1000 - 4000 mm
Dimensions
2050 mm
Top layer thickness
5,3 mm

Quality
AB/C,
Douglasie -  3-Schicht

Douglas fir

Panel thickness
19, 27 mm
Dimensions
5050/2520 x 2050 mm
Top layer width
140 mm (131 mm)
Top layer thickness
5,3 mm

Quality
ABB
Effex

CONIFER WOOD KNOTLESS

With the wood types of knotless spruce and knotless Siberian larch, Rema offers a panel material that is completely free of knots and achieves its high degree of homogeneity by grading the rift of the grain. These panels not only have very few knots but are definitely knotless. Both the colour and the structure of each individual panel match the others.

As an alternative, we also offer our 3-ply Effex panel in cooperation with the Finnish wood products company Stora Enso. Effex is also a knotless material with pure rift grading that is made of Nordic pine. Many small rods are finger-jointed, which creates a homogeneously but also very lively structure. In the format of 5050 x 2050 mm, EFFEX opens up unimagined application possibilities.

Details

DESIGNS & VARIANTS

Effex

Effex

Panel thickness
19, 27, 42 mm (42 mm = 5-Ply panel)
Dimensions
5050/2520 x 2050 mm
Top layer thickness
5,1

Quality
A/A, A/C
Fichte astrein - 3-Schicht

Spruce rift / semi-rift

Panel thickness
16, 19, 27 mm
Width
2050 mm
Length
1000 - 4000 mm
Top layer thickness
5,3 mm

Quality
A/A, A/C, C
Laerche astrein - 3-Schicht

Sib. Larch rift/semi-rift

Panel thickness
16, 19, 27 mm
Width
2050 mm
Length
1000 - 4000 mm
Top layer thickness
5,3 mm

Altholz - 3-Schicht

NOSTALGIC WOOD

A piece of history for rustic masterpieces: Reclaimed wood panels by Rema are made of wood from century-old farmhouses and barns. As an alternative, we produce panels made of wood that was completely naturally steam-treated in antique spruce and antique larch, as well as trimmed timber in the exact matching colour.

Details

DESIGNS & VARIANTS

Altholz - 3-Schicht

Reclaimed wood

Panel thickness
12, 19, 27 mm
Width
2050 mm
Length
2000 - 5050 mm decreasing
Top layer width
various (ca. 150-250mm)
Top layer thickness
3,8 mm (12 mm), 5,3 mm (ab 19 mm)
Quality
one sided, both sided (if one sided back is antique Spruce)
Fichte Antik - 3-Schicht

nordic antique Spruce

Panel thickness
12, 19, 27 mm
Dimensions
5050/2520 x 2050 mm
Top layer width
140 mm (131 mm)
Top layer thickness
3,8 mm (12), 5,3 mm (19), 8,7 mm (27)
Quality
A/AB, A/C, AB Standard, B/C, C/C nicht alle Qualitäten bei jeder Stärke
Laerche-Antik-3-Schicht

siberian antique Larch

Panel thickness
19, 27 mm
Dimensions
5050/2520 x 2050 mm
Top layer width
140 mm (131 mm)
Top layer thickness
5,3 mm

Quality
AB Standard
Menu